Assignment 02: Pattern Maker Making

-Week 5~Week 9-

(29.9.2022~27.10.2022)

Introduction to Pattern Technology

---------------------------------------------------------

Topic: Pattern Making by using Modaris and Diamino (Maker Manager&Marker Making) Software

Description:

Based on the first assessment task result, students are required to produce 3D garment sampling by using Modaris and Diamino software. This task will allow students to understand the process from creating a pattern in Modaris and calculate their fabric estimation in Diamino. In Diamino software, students are required to arrange the pattern layout to reduce the fabric consumption. Students should be able to generate marker making to analyse pattern maker efficiency. Students also will be tasked to plot the final working pattern piece with JustPrint. At the end of this task, students will assemble the pattern in producing 3D garment sampling.

-Week 5-

Our lecturer showed us they steps to use Diamino software. After finish the pattern in Modaris, open Maker Manager.

Set your own access path

Then, go to Contraints, click material menu and enter the name (zero/90/180 degree).

Set the Material constraints and save.

After that, go to Marker, enter name (same as the file name of your pattern), fabric width, presentation choose single ply, constrain and spacing between pieces 30mm.

Then add variant (blue shirt icon) to select your modaris.mdl file and size to create marker.

Set marker

Then, launch Maker Making. Arrange all the pattern, tap 5 to rotate the pattern.

Maker Making

Next, go to Justprint to add marker for printing and marker checking.

 

-Week 5~Week 7-

We draft our first design's pattern by using Modaris software.

Drafting process by using Modaris software:

Drawing top pattern

Top pattern (Front and Back)

Pants pattern with fly pieces

Design 1 Pattern:

Top and pants pattern

Edit title block

Edit title block

Add Variant

Then, launch Maker Manager to setup constraints and maker.

Launch Maker Making to arrange all the pattern.

Justprint

Set Maker label

Set Maker Header

Launch Pattern plotter to print out your pattern.

Pattern plotter

 

Print out pattern:

Maker header

Cut out paper pattern:

Cut Fabric and lining:

Cut out pattern in Calico

Final pattern in Calico:

Final Pattern in Lining fabric:

Sewing process:

Attaching all the calico panels

Attach lining panels together

Iron the seam nicely

Front (calico)

Back (calico)

Front (lining)

 

Back (lining)

Overlock the side seam of the ruffle panel

Attach top with lining

topstitch

Attach top with ruffle panel and overlock

attach zipper at the back

iron interfacing for collar

Close curve seam:

sew 2cm seam according the curve

fold and topstitch

Trim excess seam

fold again and sew baby seam

Detail: collar and neck scraps opening with snap button

Detail 2

Detail 3

Final Result: